Next question.....what waste tank is used and how do I access it?
09-17-2014, 06:09 PM
#11
Registered
Is getting rid of the wife and daughter an option?
Hi Pat,
No actually I was unaware of that one, thanks for posting up!
Have you ever fit a larger tank than the 6 gallon in a 37? I have a wife and daughter and with a electric toilet that uses a half gallon or more per flush it fills quickly. Appreciate any feedback on this.
No actually I was unaware of that one, thanks for posting up!
Have you ever fit a larger tank than the 6 gallon in a 37? I have a wife and daughter and with a electric toilet that uses a half gallon or more per flush it fills quickly. Appreciate any feedback on this.
VIP Member
09-17-2014, 07:40 PM
#13
Registered
Thread Starter
HA! Need them both, daughter for the deduction and wife to pay for boat!!
To be honest, I miss my vacuflush... A LOT. The electric head always spits upward on the flush. I cleaned the vent, changed the vent line, replaced the waste line to the tank, replaced the joker valve.
At this point I am almost ready to buy a new motor/grinder Assy.
But, I would still like a larger tank if it will fit. Have you tried?
To be honest, I miss my vacuflush... A LOT. The electric head always spits upward on the flush. I cleaned the vent, changed the vent line, replaced the waste line to the tank, replaced the joker valve.
At this point I am almost ready to buy a new motor/grinder Assy.
But, I would still like a larger tank if it will fit. Have you tried?
09-17-2014, 10:02 PM
#14
Platinum Member
Platinum Member
Ya know they make a simple sensor and gauge for the existing tank, don't you?
http://www.trioniccorp.com/index.php...l-monitor.html
http://www.trioniccorp.com/index.php...l-monitor.html
09-17-2014, 10:08 PM
#15
Platinum Member
Platinum Member
HA! Need them both, daughter for the deduction and wife to pay for boat!!
To be honest, I miss my vacuflush... A LOT. The electric head always spits upward on the flush. I cleaned the vent, changed the vent line, replaced the waste line to the tank, replaced the joker valve.
At this point I am almost ready to buy a new motor/grinder Assy.
But, I would still like a larger tank if it will fit. Have you tried?
To be honest, I miss my vacuflush... A LOT. The electric head always spits upward on the flush. I cleaned the vent, changed the vent line, replaced the waste line to the tank, replaced the joker valve.
At this point I am almost ready to buy a new motor/grinder Assy.
But, I would still like a larger tank if it will fit. Have you tried?
09-18-2014, 06:35 AM
#16
Registered
09-18-2014, 07:35 AM
#17
[ATTACH=CONFIG]529741[/ATTACH]
The switch in the bottom left of that picture has:
Flush
Fill
Drain
...in separate functions; similar to the way mine came way back when. Rewiring to that setup shouldn't be a big deal, but you would just have to acquire that switch separate.
http://www.iboats.com/ITT-Jabsco-Qui.../view_id.47307
The switch in the bottom left of that picture has:
Flush
Fill
Drain
...in separate functions; similar to the way mine came way back when. Rewiring to that setup shouldn't be a big deal, but you would just have to acquire that switch separate.
http://www.iboats.com/ITT-Jabsco-Qui.../view_id.47307
09-18-2014, 08:40 AM
#19
Charter Member #1171
Charter Member
Im with you ,,,,,we had a vacuflush,,,,, and it was still just fender storage in there !!!!
__________________
I want to live in a world where a chicken can cross the road and not have its motives questioned.
I want to live in a world where a chicken can cross the road and not have its motives questioned.
