Sommer 2015 has begun...
#1
Registered
Thread Starter
Sommer 2015 has begun...
Hit the Big Pond on Saturday...46 degrees out! Pat...that is like 1/2 the temperature you are used to! Your Miller Lite probably isn't even that cold! Boat ran great...freshened 525s courtesy of teamsynergy. New valve springs, retainers, gaskets, and a new set of rockers in one motor (found a cracked bearing on one, so bought a whole new set of Teagues). Oh...also...some welded up CMIs...when we pulled them, we found pinholes on three of the four (only one was questionably serious, as it was by the collector). Got them patched up and pressure tested...and good to go.
Rolling down to the swamp next Wednesday for the Tickfaw Two Hunnert! Gotta get her shined up!
Rolling down to the swamp next Wednesday for the Tickfaw Two Hunnert! Gotta get her shined up!
#3
Registered
Thread Starter
We will be running with Craig and Patti again...following them around, anyway.
#6
Platinum Member
Platinum Member
iTrader: (6)
Nice hot rod Sommer, wish I could join ya, mines in the shop getting a Heart transplant, in the capable surgical hands of the father & son duo in Broken Arrow, OK
#9
Registered
Be careful with those headers. Once they crack, they only keep cracking. Mine cracked 3 years in a row causing two new top ends and a lot of downtime. Got Stainless Marine headers on there now and have had 2 years of trouble free boating.
#10
Registered
Thread Starter
They weren't cracked anywhere...just rusted with pinhole leaks.