Bilge blower hose fitting on rear transom
#3
Registered
Thread Starter
Appreciate the help Pat.
I got the vents made from billet then polished and clear anodized. Also changed the vent openings straight to match the side vents.
[ATTACH=CONFIG]556402[/ATTACH]
I got the vents made from billet then polished and clear anodized. Also changed the vent openings straight to match the side vents.
[ATTACH=CONFIG]556402[/ATTACH]
#5
Registered
Thread Starter
Morning Pat,
Thanks for the compliment!
My friend up here in Detroit has a machine shop so I enlisted his help. The bilge vents turned out great too.....the dimensions were not symmetrical on the original plastic ones so I had him correct that as well. I will post them this weekend.
Thanks for the compliment!
My friend up here in Detroit has a machine shop so I enlisted his help. The bilge vents turned out great too.....the dimensions were not symmetrical on the original plastic ones so I had him correct that as well. I will post them this weekend.