- new paint shop Dutton MI
- Filling holes in stringers
- Repairing imperfections on sides of boat
- Epoxy and 410 filler
- Easier way or product for painting small pieces?
- fix for where hatch hinges bolt??
- what is everyone using as a fillet material
- Deck Removal?
- Removing thru hull depth finder. Fixing the hole?
- Gelcoat to far gone-PAINT
- Filling Compound for Aluminum
- painting - costs?
- I/O to O/B conversion questions
- Paint Advive Please???
- MTI Paint
- Wet sand help.
- Bolster redo? Kinda plain now
- BAD fiberglass job on The Bachelor tonight?
- what kind of fiberglass resin
- Bring the color back out
- Converting a Single F16 Canopy Race into a 4 Person Canopy Pleasure
- Anyone using sketchup to design parts?
- Scratches on bottom.
- what type of plywood is everyone using
- what type of plywood is everyone using
- Drilling a hole thru the transom?
- how many layers of glass
- What type of vinyl for marine graphics?
- painting a stripe...do i need to clear over it?
- Clear Coat
- Painting
- Best way/ tool to cut speaker holes in cockpit?
- Delamination
- No Paint Here
- Bilge paint recommendation
- anyone used aeromarine epoxy resin
- Donzi 16 Blackhawk
- glass over a sub box thats mdf ?
- another one for glass dave, or anyone !
- Painting Galvanized Trailer
- Paint job video?
- Fitting a Raymarine E7 in my dash
- Bondo and sandpaper
- 24 7 pantera floor repair question
- No bracing between stringers?
- Awlcraft 2000 coverage
- fiberglass work
- Looking for car door style trim for fiberglass edges
- painting drives
- Gauge panel
- Notched Transom purpose?
- I know that this isn't a boat question but it has to do with fiber glass
- priming epoxy repair
- Glass Fiber Shortage???
- Repairing transom after trim tab removal
- Props For Glass Dave Great Work!!!!
- Cabin refinish
- my winter project
- new boats painted
- Partial or full transom replacement???
- epoxy and mat compatibility
- Ghosting process
- transom replace
- Would epoxy work best?
- Carbon Fiber Question
- Removing Painted on Graphics
- PPG paint to match gelcoat
- primers?
- Donzi Z25 keel damage from beaching
- Need some glassing advice guys
- glass dave
- surface wax
- Glossy Bottom Paint
- Building a new engine hatch - any pointers?
- Transom advice
- tree fell on my boat. Fiberglass?
- Duplicolor metalcast
- glass dave this ones 4 u
- glass dave this ones 4 u
- high build surfacing primer
- wrap removed
- replacing the transom in my 415 Stinger, looking for advice
- fiberglass repair in Maryland
- Modifying strakes on a 24x7 hull (24 Pantera)?
- A quick question on fabric and a picture
- How hard is Fiberglass for the DIY??
- Ready to paint my bilge, narrowed it down But Need part #s
- Best core material for windscreen to replace windshield
- 38 scarab Hull material questions
- thickened epoxy or rage gold for fairing
- Restoring Gelcoat -versus- Painting (?) Pro's & Con's
- Rough sanding....what's next?
- New England paint shop.
- best clear to use
- What do I replace these stringers with?
- Imron??
- removing 3m5200 or the like
- Best Gel / Glass Guys in the MidAtlantic Area!
- wet sanding any buffing gel coat
- Paint Vs Gel Coat ???
- Fiberglass repair in the midwest area
- How can you tell
- black stains on gel from gas vent
- Ohio boat painter?
- Another Hula Boat Care fan
- Carnuba or not to Carnuba?
- Removing Adhesive From Paint
- So I searched and researched I think I am ready?
- Fiberglass
- Help with hull problems.
- Not your usual dirty water stain question
- Regelling a 28' cig. How much should it cost?
- Hula Boat Care
- strong adhesive/epoxy
- fountain bildge paint
- stress cracks in gel coat
- Imron or awlgrip ??
- Any Body Got a Snap On Buffer
- Building Race Hatches.
- Touch ups?
- Hula Boat Care Fan
- Touch Ups?
- painting a stand up ski..
- Removing tabbing, glass??
- Bottom paint removal chesapeake bay area
- Outboard transom repair??
- Any Body Use Shine On Boat and RV Restorer
- help with muddy water stains..
- how to fill holes in transom for outboard conversion
- Removing painted on lettering?
- How to look for rot/wet core?
- acetone and gel
- Bottom Paint Peeling
- Custom painter at LOTO ?
- Scratches on Bottom
- Awesome video documentation of complete overhaul
- Repairing rot
- how to remove bow roller marks
- Leverage vs. Vitero
- Refinishing advice needed
- blistering on botton
- twin to single conversion on a CAT
- Where to Locate Dolly for painting a 38 Foot Boat?
- glass & paint guy wanted between n.y.c & maine
- question about marine paint and clearcoat
- Vinyl Graphics Designer Recommendations
- Gelcoat safe solvents
- Looking for a Wrap guy near Philadelphia
- Any good fiberglass guys in Michigan or Indiana?
- Rocket repaint
- can i have some advice on grit sizes for painting my boat?
- weekend paint job
- Boat wrap, gelcoat, paint...?
- Spraying Gelcoat
- Removing spray on bedliner
- Pro's and Con's for this Wolfgang Paint Sealer
- Couple of problem areas, Glassdave please advise!
- Cougar Cub=Glassdave Help
- Vibra Cut
- Epoxy adhesion question?
- How to bring boat paint back to life???
- repainting trailer????
- Quick Detailer/Cleaner
- Custom Paint??
- trailer paint
- Fiberglass current products
- epoxy paint
- CARLOS A PAEZ boat builder
- How to keep resin from curing/sticking to roller?
- Going price for GEL COAT repair ?
- BTS protectant/sealant?
- Question about. deck not straight
- Meguiar's 105 Compound
- Transom Work in Chicagoland
- Oxidized aluminum, prep to paint?
- bonding hull & deck question?
- The Re-Birth of an Apache Scout
- Wetsand/Polish price per foot?
- Showing off some Fountain of Youth after pics
- Bottom Paint
- So has anyone used the Permanon on a boat?
- Wheeling Questions, First Time
- What material glove for Vinylester
- linex on outdrive
- painting spray on bedliner ?
- Painting caulk/sealant
- Best "wax" ever!!!
- what do you think ? bottom coating
- Gel Coat Crack Repair?
- Deck coating....need some help ASAP
- How layers of 1708 - 1/4"
- How to repair small holes in the transom?
- Hatch and Bench Seat Rebuild
- Delamination
- Airbrush my hatch cover
- 1979 pantera 24 Imron paint job pics
- How to clean carpet glue up from cuddy
- Spider cracks and pox marks
- piling damaged glass and gelcoat......repair help?
- epoxy and ultraviolet exposure
- Painting cockpit floor
- base/clear or single stage
- How much Gel
- spider cracks
- interlux bilgekote
- refinishing glass with oxidation, seat base,minor repair help needed aswell!!
- How can I safely rub out boat with Decals/Stickers?
- How to remove anti-fouling paint
- fiberglass HELP 1708
- Best tool for cutting fiberglass
- What to paint a lift tube with?
- Whats the latest and greatest compound?
- Off Topic-Body work guys
- deck and hull side bonding
- Stringer!
- What's it gonna cost?
- glassing the cockppit floor to the hull???
- boat wrap?
- Coosa Board question
- Paint over powdercoat
- New fiberglass construction shop?
- Does the 20 foot sutphen have a cored hull?
- hull painting
- MDO Plywood vs. Marine Ply vs. Coosa Board
- Painting alum checkerplate
- Chipped Fiberglass
- Turtle wax ice
- Painting: floor, gunnels, and interior sides.
- Gouges on the hull bottom
- engine compartment
- Installing depth sounder need help
- what do I paint the bottom with?
- Through hull water pickup epoxy
- Graphics Question PPG BCCC system
- paint for side of the boat, under soem water
- Gelcoat
- resin?
- Before and After Glass Daves Work!!
- Detail price?
- ?? for Glassdave
- Transducer removal
- Gel Coat DIY Help and Through Hole Patch Help
- How do you tell if its paint or gel?
- Wet sand and wheel?
- Good place to buy cleaning supplies
- patch gas tank
- Black FG - pros & cons
- Bolster base and rail finishes
- Looking for buffer/wet sander/detailer Tampa Florida
- Powerdercoating a 502 intake plenum
- Random Orbital Buffers vs DA
- where to find taller hood scoops 32 skater
- Buffers?
- resurrecting a 1985 Baja force 220
- Caulk Cleaner?
- stringer replacment
- removing graphics ???????
- Anyone Know Who Does This?
- Painting Plastic Engine Cover
- Changing Graphic Colors
- re-installing fuel tank help
- Fiberglass Work??
- wet sanding with a DA?
- Drilling a hole for a through hole fitting
- DA sanding
- Gelcoat buffing/sanding question
- De-waxer
- Bulkhead Repair w/ no access
- Its laquer
- Wood Grain Gel coat
- fibreglassing floor
- What type of Rubrail needed?
- bottom of boat
- 311 cabin stringers
- Help GlassDave!
- prepping a re-gelcoated boat for paint
- A Little Gel Coat Help Please...
- transom replace
- A few paint prep questions??
- Rust Guy??
- Bottom Paint
- Advice on repainting floor
- Gelcoat or Paint
- Gouges on the keel
- Flooring questions
- Adhearing vinyl to fiberglass????
- Need prelam panels made.
- Finishing over Epoxy
- How many gallons of paint?????? 33 Powerplay???
- Donzi Grumble Green color match and recommended paint? (PPG?)
- gelcoat clean up
- Carbon vs Fibre glass
- small gelcoat repair help
- Best paint
- Painting transom questions about quote
- New stripes ? Need Help Pic one
- Gel Coating a Cast Iron clawfoot Bathtub
- checkmate 253 template
- Crack repair
- duraglass, tigerhair?
- Glassn' on a scoop?!
- Best way to seal through hull bolt holes on transom
- Interlux BilgeKote -- Use/Opinions?
- Is aircraft stripper safe for removing paint on a boat???
- New Project - Need help estimating design and materials
- Engine painting questions...
- Fountain template
- mystery product needed
- Removing Saddle Tanks
- Seadoo help
- filling in deck hatches on a cored boat, what glass is best??
- Blister repair
- Please Help - Need graffix ideas
- Looking for advice on prep work before painting
- Question on Interlux Perfection
- oxidation mayhem
- Molding steps for dash
- boat painting
- Formula Glove Box Lid
- Preparing old boat for paint
- dual engine hull to a single engine???
- flooring
- Looking for a good fiberglass in NJ
- Removing bow lights?
- Looking gelcoat/fiberglass referral in Virginia
- Fiberglass Repair & Clear Coat
- how to cut 7/8" hole in fiberglass side panel?
- Shurhold 3100
- Should I bottom Paint?
- 233 stringer replacement- cloth help
- Need some corecell A500 1 inch, whos got some??
- Glass dust & the grinder
- Any one interested in the progress
- fiberglass work on a 272 formula
- Fairing out 1700
- painting drive primer
- Question for GlassDave
- Blueprinting the bottom?
- Bilge painting
- Guide Coat
- Thru hull sealant
- can clear coat be repaired
- Cigarette Paint Codes
- PolyGard Gelcoat
- Gel coat shelf life
- Boat renderings
- Cost to have a 21 foot Scarab painted?
- Project for GlassDave??????
- removing anti growth paint
- can you tint a neutral gel coat white?
- Painting new graphics
- paint or wrap durability?
- Will yellowing/off white color wet sand out?
- filling a hole from a thru hull fitting for a pump out toilet
- fiberglass hole filling
- Best hull cleaner I've used
- exterior ply wood
- Drilling a 2.5 inch hole in a stringer
- Plugs in transom
- Transom cutout fill in
- Looking for boat painter in NJ or Md
- Sonic 31SS crack along walkway....what to do??
- Finally decided on taking the job of building my own windscreen for my 1996 272 baja
- brand of resin
- Resto questions
- need 1700 in noth east ohio
- Removing water out of gas tank
- 3M Fine Line Tape Usage Suggestions
- Hull Widening ??? .. Why And How ?
- Glass shop in Houston/Clear Lake Area?
- installing new stringers ???
- Buffers
- Crack repair hell, 95% done, looks awful. Questions.
- Bilge Touch Up Question
- How thick is a Bravo transom?
- Gel Scratch Depth?
- Paiting New Trailer Hubs
- Filling in a Hook
- whats the thickest/heaviest filler that you can spray??
- Awlgrip Color to Match White Gel
- Redoing Non-Skid
- Fiberglass fender repair
- Engine Compartment Paint?
- Looking for comments on a hull issue
- Cleaning the Deck and Non-Skid
- Is $600 a fair price
- Chip question
- Overspray
- Chris Craft Hull updates
- Hull Reinforcement
- Imron Paint Question
- Notices several boats off here on SIGNZOO Boat wrap...care to share your price?
- Chris Craft swimplatform/ radar arch
- poliglow
- New Paint or Graphics but SOMETHING has to be done!
- chris cat fuel tank replacement
- Pissed
- Gelcoat Tricks
- In need of an anchor locker hatch for a Baja 272
- Strake crack advise needed - 1990 Baja 250ES
- What removes and protects from river scum?
- Thinkin' "Inferno orange" 4 Mag sport
- transom thickness
- how much to raise exhaust out of the water??
- fuel stains
- well it has begun (transom replacement)
- Sundeck Hinge Placement
- leverage wax
- Filling bilge to displace water
- how much resin for biax?
- Looking for Imron touchup on Formula in NJ
- Weird strips on bottom of hull?
- Fiberglass & in the sun?
- Vinal Decals
- Fiberglass repair on Old Old boat.
- Props to Glassdave
- How to paint outdrive?
- Help with 525EFI decal
- gel coat on keel
- New Interior - South Florida
- Raised Hatch / Scoop Questions
- Making Bulges In engine Hatch
- Bridging fiberglass sections together
- csm between layers of woven roven
- Engine room transom paint
- Fiberglass work in Maryland/ Mid Atlantic area, Velocity 280
- Donzi 22 ZX Hull Cracks
- respirator advice
- 32 Spectra Deck MODS
- Is there a way to temp. plug a through hull fitting hole?
- transom replacement question
- Race Glaze Polish
- leverage wax on fresh paint?
- Spider Cracks
- Detailer
- Replacing Floor?
- paint on porcelain
- Painted bilge / engine compartment cleaning
- Removing a fresh gelcoat repair
- Removing Painted on Graphics
- Suggestions for polishing scuff mark in gelcoat
- windscreen questions again.... dave??..... baja sport 250/es 250/270
- primer surface
- installing k planes..need holes filled
- transom and below the water line painting?
- Replacing non-skid. Really?
- molded side compartments
- need some help
- Bolting into core
- stringers
- Rustoleum Marine paints
- gel coat worn thru on bottom
- need help getting gel kote numbers
- Gelcoat and graphics repairs
- Larson boats question.
- Fiberglass windscreen project
- What paint to use temporarily
- New Buffer Link
- Gelcoat
- fiberglass cloth
- Glass Dave - Nice Write up
- Buffing Paint
- paint
- Clear Coat peeling
- WindScreen...Done!!
- Paint options
- diamond non skid
- SpectrumColor Gel, thinning, mixing ???
- Painting Bomar hatch
- Leverage products
- Powerquest Touch Up Paint
- Need some work done on my hatch. Anyone reasonable on LI??
- carbon fiber repair resin?
- Marine Tex
- Re-gel the out side of my transom
- fixing minor nicks on the outside of boat what are you using ?
- body shop resin vs vinlyester resin
- Engine Hatch
- 1991 31' Scarab Thunder Textured Deck
- bottom
- Leverage HELP....
- Hull Templates and Layouts
- Need a little help here....
- Outdrive Painting
- 13ft Boston Whaler Restoration Project
- Custom Hatch
- Gelcoat or paint
- Oxidation
- Pettit Vivid Antifouling
- What kind of paint to use on my boat?
- how to make a custom windscreen for my 272 baja?
- Strip the paint off the drive?
- Custom Dash
- Best way to fill holes after hatch scoop removal????
- High Density PVC Foam
- Bilge paint question? Temp?
- Using filler to smooth out joints??
- Wet sanding IMRON and some minor repairs
- new paint
- recoating bilge