1BIGJIM

iTrader: (1)

This is the first time I have had a cam off. I always installed them straight up and the are within 1 degree.
I have a comp XM 270
Specs are for a cam installed @ 110 intake center line
Lobe Separation 112
I do the math and come up with 113 center line.
Is three degrees worth messing with. I have the hex timing set 4/2 degree changes.
Am I missing something?

GPM

I would put it in at 109 before I would run 113, it would have more bottom and mid range. only an opinion.

1BIGJIM

iTrader: (1)

Come on cam experts, I am twiddleing my fingers and drinking a beer waiting for advise.

rmbuilder

1BIGJIM ,
GPM has it. 109* is the number.
Bob