Help! Need Help!!
#1
Registered
Gold Member
Thread Starter
Join Date: May 2004
Location: LINDEN,MI
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
Help! Need Help!!
I'm not sure what this part is called so I will call it a coupler,or a fitting. I'ts the red fitting that is at the end of the throttle cable where it attaches to the carburetor mine broke in two ,and wont allow the engine to idle down below 1000 rpm.It looks like this piece just threads on the cable. dealer said it is no longer sold separate. I have a 1990 454 mag.I'm thinking someone out there may have one. PLEASE!!!
#2
Registered
Join Date: Jan 2001
Location: ST. Louis, MO, USA
Posts: 1,658
Likes: 0
Received 0 Likes
on
0 Posts
Re: Help! Need Help!!
You may not be able to get the exact one that was on there, but a replacement will fit.
Try Rex Marine or CP performance for a Heim joint, or a simple accelerator cable ball joint (quick release).
Gary
Try Rex Marine or CP performance for a Heim joint, or a simple accelerator cable ball joint (quick release).
Gary
#3
Registered
Re: Help! Need Help!!
Mr Anderson, good Advice!
I got mine at CP Performance as well. I use the Ends that have a 10/32 thread size.
Like this
I got mine at CP Performance as well. I use the Ends that have a 10/32 thread size.
Like this