Transom photos with twin bravos.
#1
Registered
Thread Starter
Join Date: Oct 2000
Location: Lombard, Il
Posts: 650
Likes: 0
Received 0 Likes
on
0 Posts
Transom photos with twin bravos.
I'm riggin my boat and need to determine where to drill thru my transom for my drive indicator cables that go on the trim cylinders.
Could a few of you post any transom photos of boats with bravos. I have a good idea where I want to place them, and I have several photos of were they were withe TRS drives. Some photos would be helplfull.
Thanks,
Dan
Here's my clean slate
Could a few of you post any transom photos of boats with bravos. I have a good idea where I want to place them, and I have several photos of were they were withe TRS drives. Some photos would be helplfull.
Thanks,
Dan
Here's my clean slate
#8
Registered
Thread Starter
Join Date: Oct 2000
Location: Lombard, Il
Posts: 650
Likes: 0
Received 0 Likes
on
0 Posts
Re: Transom photos with twin bravos.
Hey!
Thank you all for posting the photos!
These photos will be Extrememly helpfull. I'm pretty nervous about drilling the holes for the indicator cables, almost mor than the transom asseembly cut outs!
Hey Insptech!
In the first picture of the Formula Those are the stainless double o-ring seals for running the cable thru the transom, right? I bought those and was worrired that with the 45* angle I'd have to place them too low, and not leave enough slack in the cable for the drive to move around. Any problems?
Here's what I have.
Thank you all for posting the photos!
These photos will be Extrememly helpfull. I'm pretty nervous about drilling the holes for the indicator cables, almost mor than the transom asseembly cut outs!
Hey Insptech!
In the first picture of the Formula Those are the stainless double o-ring seals for running the cable thru the transom, right? I bought those and was worrired that with the 45* angle I'd have to place them too low, and not leave enough slack in the cable for the drive to move around. Any problems?
Here's what I have.