Bravo Transom assembly ...
#1
Bravo Transom assembly ...
I have the steering assmebly out and noticed the steering arms have some play ....side to side . ..maybe 1/4" each way ....total 1/2" ? I searched and found a post said to tighten the pinch bolt and nut ..... and maybe some up and down motion ?.... I gota stop takin stuff apart ...
#2
Registered
Join Date: Apr 2005
Location: KENT ISLAND, MARYLAND
Posts: 2,675
Likes: 0
Received 0 Likes
on
0 Posts
Re: Bravo Transom assembly ...
Originally Posted by offthefront
I have the steering assmebly out and noticed the steering arms have some play ....side to side . ..maybe 1/4" each way ....total 1/2" ? I searched and found a post said to tighten the pinch bolt and nut ..... and maybe some up and down motion ?.... I gota stop takin stuff apart ...
sometimes that will work just keep in mind that if you torque it to much you can break the gimble ring !!!!!!!!!
here is a link to repair it the correct way short of replacing
http://www.jrmarine.com/products/gimbal_repair.htm