Calling all engine builders
05-21-2006, 06:25 PM
#1
Registered
Thread Starter
Join Date: Jun 2005
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Calling all engine builders
I need help with a cam. I just had my HP 500 bored out 30 over with J & E flat top pistons w/ one valve relief, I also bought merlin heads with 2.3 and 1.8 valves and 119cc chambers. i am also running a dart 2 intake and a holley 850, I already have bought aftermarket roller lifters, I just need the best off the shelf cam I can get to make the best power and stay away from reversion. The exhaust is stainless marine. The motor is in a 27 fever.
Any help would be greatly appriciated, My engine builder builds roundy round motors and doesnt want to take a chance
Any help would be greatly appriciated, My engine builder builds roundy round motors and doesnt want to take a chance
05-21-2006, 07:07 PM
#2
Registered
Re: Calling all engine builders
Originally Posted by litlguyz
I need help with a cam. I just had my HP 500 bored out 30 over with J & E flat top pistons w/ one valve relief, I also bought merlin heads with 2.3 and 1.8 valves and 119cc chambers. i am also running a dart 2 intake and a holley 850, I already have bought aftermarket roller lifters, I just need the best off the shelf cam I can get to make the best power and stay away from reversion. The exhaust is stainless marine. The motor is in a 27 fever.
Any help would be greatly appriciated, My engine builder builds roundy round motors and doesnt want to take a chance
Any help would be greatly appriciated, My engine builder builds roundy round motors and doesnt want to take a chance
Thread
Thread Starter
Forum
Replies
Last Post
timucin
General Q & A
11
09-23-2002 10:26 AM
