itilldo

Looking for info pertaining to engine pre-lubers. I have a single 525 and I would like to know if anyone here as installed one on their motor/s. If so , are you happy with the brand that you have and how was the install? Any info would be very helpful.

Thanks,
Eugene
"itilldo"

monstaaa

these work great and are not bad to install.

Frequency

I installed the Eickert kit on my motors a couple years ago. It's basically a check valve and Moroso fuel pump with high pressure hose and fittings. The suction side plumbs into the oil pan drain valve. You will need a momentary switch to energize the pump. The install takes a little work. I put a quick disconnect fitting in mine. I put another fitting on a ten foot long piece of hose and use it to pump the oil out of the pan for oil changes. Works great.

Pwrbt33

iTrader: (2)

I believe Monstaaa and I install the same brand, I use Master Lube. There nice units and easy to use and maintaine. I had custom brackets made because I dont like there way of mounting, but other than that a nice piece.

John S.

BenPerfected

Here is the Keith Eickert system installed on a rear engine mount. Clean and out out sight...

BenPerfected

missed attachment