buck183

I need to know how long I have to wait to introduce 5200 to water after using it. Does it need a certain amount of set time prior to use? Can I just wait a couple of hours and run with it?

Buck

vandeano

I think your good to go. If Im not mistaken, it cures with water. But dont take my word on it

Chris288

if I remember fast cure is 24 hours slow cure is 7 days ....

fund razor

You will probably be ok, but I always prefer to give 5200 a couple days if below the waterline as a sealer. Above the waterline as a bedding compound, (hatch etc.) a few hours is probably sufficient.

LT1GMC

It depends, there is a 5200 normal cure, which sets up in 24 hours and cures in 7 days, or a 5200 fast cure which is a much better choice, but harder to find. The label pretty much spells it out. If you don't give it enough time, it will ooze out, run, and drip.

eyezlee

Did you buy a boat? What the hell are you doing?

bowtie

If you want to put it in the water right away I believe you want 4200. Boat Life is also good it will cure if wet.

BigSilverCat

if you used it to glue your wig to your head I would wait at least two hours before swimming, and if you glued your strapon back together you dont need to wait, short stroking it wont break the glue.