Oil psi
#1
Registered
Thread Starter
Join Date: Mar 2004
Posts: 205
Likes: 0
Received 0 Likes
on
0 Posts
Oil psi
What does everyone think? Had a stock 330hp 454 put in a melling high volume oil pump had a steady oil psi of 60 hot (electric) gauge. Built the motor everything a 420 clone put in a new melling high volume oil pump mech gauge reads 50 psi hot after a hard run 5100 for maybe 2 min oil psi goes down to 42psi back to cruise 3500 back up to 48-50psi. Running 30 wt oil. How come a old used motor would carry better oil psi?
#2
Registered
Re: Oil psi
Sounds like your running good #'s to me. Pumps and bearings have diiferent clearances' , etc.. Mech gauges and electric gauges never read the same. If you want more pressure go to thicker oil.
Last edited by kennyo; 06-20-2006 at 08:44 AM.
#5
Registered
Re: Oil psi
Originally Posted by mopower
Pressure's not terrible. Bearing clearances are probably the culprit. Heavier oil or larger oil cooler would help.