Notices

496 Ho Pvc?

Thread Tools
 
Old 06-23-2006, 05:01 PM
  #1  
Registered
Thread Starter
 
Join Date: Dec 2002
Location: 1000 Islands
Posts: 4,816
Received 42 Likes on 11 Posts
Default 496 Ho PCV?

above 4K I get a heavy waft of crankase fumes in the cockpit. Definitely a stench of oil fumes, not fuel. Linearly worse as you go from 4K to WOT.

No leaks, proper level, M1 15/50, Wix filter, bla bla bla...

This is not new as I remember, but I don't remember it being this bad.

I guess I need to make a quick stop from WOT (which I hate to do) and really see if it's heavy in the bilge.

Until then, any ideas?

Thanks.

Last edited by Rippem; 06-23-2006 at 11:47 PM.
Rippem is offline  
Old 06-23-2006, 05:38 PM
  #2  
Registered
 
Join Date: Oct 2002
Location: Louisville Ky
Posts: 105
Likes: 0
Received 0 Likes on 0 Posts
Default Re: 496 Ho Pvc?

Just a thought. When you change the oil filter it is difficult to keep oil from running down on the exhaust manifold. This will cause a strong smell for a while, If you have done this recently.
Island Hopper is offline  
Old 06-23-2006, 08:23 PM
  #3  
Registered
Thread Starter
 
Join Date: Dec 2002
Location: 1000 Islands
Posts: 4,816
Received 42 Likes on 11 Posts
Default Re: 496 Ho Pvc?

Originally Posted by Island Hopper
Just a thought. When you change the oil filter it is difficult to keep oil from running down on the exhaust manifold. This will cause a strong smell for a while, If you have done this recently.
no, I wrap rags...no mess.

like I said it's always been an issue, it just seems worse this year.
Rippem is offline  
Old 06-23-2006, 09:45 PM
  #4  
Registered
 
GoCiggie31's Avatar
 
Join Date: Mar 2005
Location: Where the water meets the oaks 'n Pines in the Sierra Nevada's of NorCal
Posts: 975
Likes: 0
Received 1 Like on 1 Post
Default Re: 496 Ho Pvc?

Do you believe the smell is coming from the breathers/crankcase and if so, how much oil are u burning? If excessive you may want to start with a compression or cylinder leak test?

Good luck
GoCiggie31 is offline  
Old 06-24-2006, 02:54 PM
  #5  
Registered
 
Join Date: Jan 2004
Location: San Diego, California
Posts: 2,777
Likes: 0
Received 6 Likes on 6 Posts
Wink Re: 496 Ho Pvc?

The 496 engine has a built in orfice in the bottom of the intake manifold that is .080" size and when the engine is running it keeps a a slight negative pressure in the crankcase. There is a fresh air into the crankcase that pulls fresh air into the throttlebody in the throat and down an intake manifld passage into the bottom of the oil fill tube. If you take your oil fill tube cap off at idle is there a slight vacumn? There should be. Also see what the oil fill does with the cap off at 4K rpms. If your crankcase pressure (due to blowby, etc.)is high this pressure can force oil vapor back into the intake manifold and some vapor back out the flame arrestor on the throttlebody which you could smell if its doing that. Also with your motor off and flame arrestor off, open the throttle full open and look down inside the manifold intake opening and see if the inside looks moist or wet with oil, this can be a good indicator of what is possibly happening. If you see that I would suggest a compression test with a leakdown test. Stock 496's should have about 150-160 psi cranking compression in each cylinder ona cold engine. Hope this helps, hope its something simple.

Ray @ Raylar
Raylar is offline  
Old 06-24-2006, 07:33 PM
  #6  
Registered
Thread Starter
 
Join Date: Dec 2002
Location: 1000 Islands
Posts: 4,816
Received 42 Likes on 11 Posts
Default Re: 496 Ho Pvc?

Thanks Raylar! I will take a look at these things. I have never had to add oil between changes (30-40 hours). Also the boat runs well. Pulls RPM, both run identical R's at all speeds to WOT. Boat runs appropriate top speed. Wouldn't I have a performance loss if I had one or more weak cylinders?
Rippem is offline  
Old 10-09-2006, 09:59 AM
  #7  
Registered
 
Join Date: Aug 2005
Location: Sandusky, OH
Posts: 225
Likes: 0
Received 0 Likes on 0 Posts
Default Re: 496 Ho Pvc?

Rippem
Did you ever figure out what was causing your crank case fumes? I just noticed mine was starting to smell the other day.
turnerrd is offline  
Old 10-09-2006, 10:57 AM
  #8  
SORE MEMBER
Platinum Member
 
Wobble's Avatar
 
Join Date: Apr 2004
Location: 29°50'49.74"N 95° 5'17.55"W.......TEXAS
Posts: 6,989
Likes: 0
Received 1 Like on 1 Post
Default Re: 496 Ho Pvc?

Check your drive lube also, right before mine twisted off the vertical shaft there was a strong oil smell in the cockpit, it had puked a small amount of drive fluid out of the reservoir.
Wobble is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
srl520
Formula
2
01-28-2008 08:37 PM
dualprop
General Boating Discussion
4
09-06-2006 10:09 AM
sjleroy
General Boating Discussion
3
12-08-2005 01:49 PM
EWB
General Q & A
7
06-17-2002 08:11 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



Quick Reply: 496 Ho Pvc?


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.