Who Makes The Best Oil. Cooler I Need One
#1
Gold Member
Gold Member
Thread Starter
Join Date: Mar 2003
Location: Grosse ile michigan
Posts: 2,369
Likes: 0
Received 77 Likes
on
32 Posts
Who Makes The Best Oil. Cooler I Need One
My Motor Ran Over 250 Deg In Oil Temp It Is Not Pluged I Need A Bigger Cooler Who Makes The Best One, And How Soon Can I Get It..................
#2
~~~~
Charter Member
Re: Who Makes The Best Oil. Cooler I Need One
I am thoroughly satisfied with the 3" oil cooler I received from Fred.
I was hitting 250 degrees at WOT with a 2" x 17" cooler.
Now, I am at 225-230 degrees at WOT with a 3" x 18" cooler.
My oil temperature is T-Stat controlled with the Mercury Racing HP500 filter mount.
I was hitting 250 degrees at WOT with a 2" x 17" cooler.
Now, I am at 225-230 degrees at WOT with a 3" x 18" cooler.
My oil temperature is T-Stat controlled with the Mercury Racing HP500 filter mount.
#3
Registered
Join Date: Oct 2004
Location: medellin colombia, pablo escobar's lil town
Posts: 8,390
Likes: 0
Received 5 Likes
on
3 Posts
Re: Who Makes The Best Oil. Cooler I Need One
if you install the big 3" cooler you will probably want to install a themostat to keep it warm enough the evaporate any condensation in the engine.
#4
Gold Member
Gold Member
Thread Starter
Join Date: Mar 2003
Location: Grosse ile michigan
Posts: 2,369
Likes: 0
Received 77 Likes
on
32 Posts
Re: Who Makes The Best Oil. Cooler I Need One
I Welded A Sending Unit In My Oil Pan So I Get The Temp Reading At Its Hottest Point, I Might Be Oveer Reacting But The Redings I Get There Are Hot,270-280 At Wot..........
#5
~~~~
Charter Member
Re: Who Makes The Best Oil. Cooler I Need One
What you haven't revealed is what size cooler you are using now and what are your oil temps after the WOT run, at cruise (i.e. 3500 RPM).
My oil temp is measured at the inlet side of the oil filter mount. This would be the next highest reading after the oil pan. I would guess the reading would be higher at the pan.
My oil temp is measured at the inlet side of the oil filter mount. This would be the next highest reading after the oil pan. I would guess the reading would be higher at the pan.
#6
Gold Member
Gold Member
Thread Starter
Join Date: Mar 2003
Location: Grosse ile michigan
Posts: 2,369
Likes: 0
Received 77 Likes
on
32 Posts
Re: Who Makes The Best Oil. Cooler I Need One
The Cooler Is At Least 3in In Diameter And 2 Ft Long MY OIL TEMP IS AT 260-270 AT WOT CRUISING IT IS RUNNING AT 250- 260...........AS FAR AS I KNOW THATS WAY TO HOT
Last edited by nocigarette; 06-26-2006 at 04:25 PM.
#7
Registered
Join Date: Sep 2004
Location: Torrance, California
Posts: 362
Likes: 0
Received 0 Likes
on
0 Posts
Re: Who Makes The Best Oil. Cooler I Need One
Originally Posted by nocigarette
The Cooler Is At Least 3in In Diameter And 2 Ft Long MY OIL TEMP IS AT 260-270 AT WOT CRUISING IT IS RUNNING AT 250- 260...........AS FAR AS I KNOW THATS WAY TO HOT
I put my sender in oil pan also and get a 300 degree reading and I have a big oil cooler I bought from teague and it doesn't even have have the power steering cooler built in. When I use my Lazar point thermo gun it reads 210 at the oil filter.
Go figure.......
#8
Gold Member
Gold Member
Thread Starter
Join Date: Mar 2003
Location: Grosse ile michigan
Posts: 2,369
Likes: 0
Received 77 Likes
on
32 Posts
Re: Who Makes The Best Oil. Cooler I Need One
Originally Posted by vandeano
I put my sender in oil pan also and get a 300 degree reading and I have a big oil cooler I bought from teague and it doesn't even have have the power steering cooler built in. When I use my Lazar point thermo gun it reads 210 at the oil filter.
Go figure.......
Go figure.......
THATS THE ANWSER I WAS LOOKING FOR SOMEONE WHO THOUGHT THE SAME WAY AS ME TRYING TO BE SHARP AND WELDING THE UNIT IN THE PAN. I WILL STILL GET A POINTER AND DOUBLE CHECK THANK YOUUUUUUUUUUUUUUUUUUUUUUUUUUUU
Thread
Thread Starter
Forum
Replies
Last Post
t500hps
General Boating Discussion
5
07-17-2012 09:23 AM