Motec CDI 8 - Offshore Marine Application
07-01-2006, 11:08 AM
#1
Registered
Thread Starter
Join Date: Oct 2005
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Motec CDI 8 - Offshore Marine Application
I'd like to ask an ignition related question.
Has anybody used the Motec CDI-8 standalone CDI coil per cylinder ignition system in an offshore race type application? If so, how did it work out? If so, what did you do to further marinize it?
We have some mechanical fuel injected BB NA race engines, and we would like to get away from all of the clunky distributor related stuff.
The Motec CDI-8 was one system that came to mind. The MSD CPC system was another. Hemi type plug location for us, so stick coils could even be used, without the need for secondary plug leads.
Thanks.
Has anybody used the Motec CDI-8 standalone CDI coil per cylinder ignition system in an offshore race type application? If so, how did it work out? If so, what did you do to further marinize it?
We have some mechanical fuel injected BB NA race engines, and we would like to get away from all of the clunky distributor related stuff.
The Motec CDI-8 was one system that came to mind. The MSD CPC system was another. Hemi type plug location for us, so stick coils could even be used, without the need for secondary plug leads.
Thanks.
Thread
Thread Starter
Forum
Replies
Last Post
2 Trick Rick
General Q & A
21
08-20-2019 09:02 AM
Shah Mat
General Boating Discussion
10
03-08-2004 08:53 PM
