2112

I have two oversized heat exhangers. One for Oil (3"x18") and one for coolant (5"x24"). Using 1 1/4" hose through a Eickart sea pump pulling though a bravo XR should I be running through the coolant exhanger first (temp @ 170) before going through the Oil exchanger which is thermostatically set to open at 212 degrees? Or is the flow enough that it doesn't matter which one comes first?

My thinking is incrementally step up in temps or the Oil temp will overheat the coolant when it opens up.

monstaaa

typically thru oil cooler first, then heat exchanger.

2112

That is how I had it first, then started thinking that when the oil thermostat opens up it will reduce the cooling capacity of the "radiator".

Can you elaborate?

GOODT

oil cooler first it the typical set up,oil also help cool the mtr