Trim Sending Unit
#1
Gold Member
Gold Member
Thread Starter
Join Date: Feb 2004
Location: Hollywood, MD
Posts: 1,212
Likes: 0
Received 0 Likes
on
0 Posts
Trim Sending Unit
I have a bravo one drive with fauria gauges. My trim gauge hasn't worked since i bought the boat and this past weekend the port side trim sending unit broke off the side of the outdrive. Now the plastic "puck" is just dangling on the left side of the outdrive by the two wires that lead into it. I eventually want to go to mechanical actuators, but for now how do I get this "puck" off without taking the outdrive apart?
I bought a replacement, but I don't think its worth doing all the stuff thats in the instructions since i never used it anyways. I just want it out of the way.
I bought a replacement, but I don't think its worth doing all the stuff thats in the instructions since i never used it anyways. I just want it out of the way.
#3
Registered
Join Date: Apr 2005
Location: KENT ISLAND, MARYLAND
Posts: 2,675
Likes: 0
Received 0 Likes
on
0 Posts
Re: Trim Sending Unit
Originally Posted by Airpacker
side cutters and liquid electrical tape should do the trick.
pretty much what he said but wouldnt worry about sealing it chances are the wires have been shot for a while
#4
Gold Member
Gold Member
Thread Starter
Join Date: Feb 2004
Location: Hollywood, MD
Posts: 1,212
Likes: 0
Received 0 Likes
on
0 Posts
Re: Trim Sending Unit
Just to clarify, there's no electrical worries? I can just cut the wires as far back as I can reach and let them be?