Mass Flo efi system
12-29-2006, 10:07 PM
#1
Registered
Thread Starter
Join Date: Oct 2002
Location: New Orleans,La.
Posts: 983
Likes: 0
Received 0 Likes
on
0 Posts
Mass Flo efi system
Does anyone know anything about this efi system? www.massfloefi.com Sounds cool but I want to check around before I drop 3K.Thanks,BOB
12-30-2006, 12:21 PM
#3
Registered
Thread Starter
Join Date: Oct 2002
Location: New Orleans,La.
Posts: 983
Likes: 0
Received 0 Likes
on
0 Posts
Re: Mass Flo efi system
Marty, www.massfloefi.com They use a air flow meter from a LS-6 chevy inside the air filter on top of a 1000cfm throttle body. BOB
12-30-2006, 02:51 PM
#4
Platinum Member
Platinum Member
iTrader: (1)
Re: Mass Flo efi system
I read all thru their site last night,it seems they are using a 302 ford ecu,I couldn't figure what they are doing for a timing curve/timing map though. It seems like a good idea,a person could almost duplicate what they have done for less than 1/2 if you were ambitious,Smitty
12-30-2006, 03:48 PM
#5
Registered
Thread Starter
Join Date: Oct 2002
Location: New Orleans,La.
Posts: 983
Likes: 0
Received 0 Likes
on
0 Posts
Re: Mass Flo efi system
Smitty,The only info they need is approx hp.(for injector sizing)When the system is installed,you need only set the timing and fuel pressure.(49 lbs)They will probably do a custom curve depending on the application? BOB
