Mefi 3 wanted for interrupt experiment
02-08-2007, 03:21 PM
#1
Registered
Thread Starter
Join Date: Nov 2006
Location: Vrouwenpolder, The Netherlands
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
Mefi 3 wanted for interrupt experiment
Hello,
I couldn't find my previous thread, but the thing is that I want to use use an Alpha drive on a 6.2 MX with Mefi-3 Bravo ECM.
I am still thinking about cutting the power to 4 of the 8 injectors when switching out of gear, but should that give any trouble for the injector driver inside the ECM? or damage to the crank due to the instable running?
I spook with Mark and he should be able to do a reflash on the ECM, but I need a spare one, I can't get insurance overseas on mine. And I like to keep my original.
So wanted MEFI-3 ECM
What about the kit AZ-speed sells, does that have the interrupt circuit in it? or can I program it in?
Richard
I couldn't find my previous thread, but the thing is that I want to use use an Alpha drive on a 6.2 MX with Mefi-3 Bravo ECM.
I am still thinking about cutting the power to 4 of the 8 injectors when switching out of gear, but should that give any trouble for the injector driver inside the ECM? or damage to the crank due to the instable running?
I spook with Mark and he should be able to do a reflash on the ECM, but I need a spare one, I can't get insurance overseas on mine. And I like to keep my original.
So wanted MEFI-3 ECM
What about the kit AZ-speed sells, does that have the interrupt circuit in it? or can I program it in?
Richard
02-09-2007, 01:59 AM
#2
Platinum Member
Platinum Member
iTrader: (1)
Re: Mefi 3 wanted for interrupt experiment
If anyonre has any "spare" mefi 3's that aren't 5 or 6 hundred dolars I need one too for my next 502 project but I'll tell you right now the market has dried right up on them,Smitty
