Tall valve covers
#1
Registered
Thread Starter
Join Date: Feb 2006
Location: Princeton,Indiana
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Tall valve covers
Does anyone know if you can install the tall valve covers on the 454 mag mpi with the factory exuast manifolds.Going to a 1.8 roller going to need the clearance. Thanks for any and all input.
#2
Not positive but I would think the angled version of the tall covers would work.
I have 2 pair for sale if interested. I know they have enough height to clear your valve train w/ 1.8 ratio. They are freshly bead blasted and ready for paint/powdercoating of your choice, cheap.
Rick 847-874-2035
I have 2 pair for sale if interested. I know they have enough height to clear your valve train w/ 1.8 ratio. They are freshly bead blasted and ready for paint/powdercoating of your choice, cheap.
Rick 847-874-2035
#3
Registered
Thread Starter
Join Date: Feb 2006
Location: Princeton,Indiana
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Both of them sound great if you guys could e-mail me with some prices at [email protected] I would like to get a set maybe two Ive got other engine projects and you can never have enough spare parts.
#4
Charter Member
Charter Member
Join Date: Nov 2000
Location: Lake Charles, LA USA
Posts: 1,094
Likes: 0
Received 0 Likes
on
0 Posts
I put roller rockers on my 502 mag MPI. I ground off the tits on the inside of the stock valve covers and installed thick cork valve cover gaskets. Worked like a champ. Regardless you will have to grind the corner off of two of the rockers (one intake on each side) due to clearance issues with the valve cover stud boss'.
Last edited by Thunderstruck; 02-24-2007 at 03:22 PM. Reason: grammar