CONTURA III switch covers
#1
Registered
Thread Starter
Join Date: Mar 2005
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
CONTURA III switch covers
I am looking for 6 white switch covers, with black lettering to replace my trim panal switches on a 33 OUTLAW. They have worn off and I just bought the boat over the winter and am starting to clean up some little things. I am looking for switches labeled BOTH (I think..cant read it so worn), PORT, STRB, TRAILER, TRIM and TRIM.
I was able to find blank switches but not ones that are labeled. All the new ones are black with white letters. Dont want to replace all of them. Any assistance would be appreciated.
Thanks,
Brian
I was able to find blank switches but not ones that are labeled. All the new ones are black with white letters. Dont want to replace all of them. Any assistance would be appreciated.
Thanks,
Brian
#3
Registered
Join Date: May 2005
Location: Tampa, Florida
Posts: 393
Likes: 0
Received 0 Likes
on
0 Posts
I have looked for those for a very long time. I am trying to get the ones where the letters are lit up at night... Contacted the manufacturer who said I had to order 50 of each to get the lettering. Surprize that Livorsi or someone has not jumped on this and started selling them labeled...
#4
Registered User
These people stock a fairly broad selection of off-the-shelf labelled switch covers for marine use-
http://www.mastervolt.com/products.p...23&prg_id=1130
http://www.mastervolt.com/products.p...23&prg_id=1130
#5
Registered
Join Date: May 2005
Location: Tampa, Florida
Posts: 393
Likes: 0
Received 0 Likes
on
0 Posts
These people stock a fairly broad selection of off-the-shelf labelled switch covers for marine use-
http://www.mastervolt.com/products.p...23&prg_id=1130
http://www.mastervolt.com/products.p...23&prg_id=1130
#7
Registered User
There's a switch manufacturer out there that makes blanks and they're engraveable with standard equipment. I've searched my links and my files to no avail- sorry. If I happen across them I'll let you know.
#8
Registered
Join Date: May 2005
Location: Tampa, Florida
Posts: 393
Likes: 0
Received 0 Likes
on
0 Posts
That will be appreciated. I contacted the manufacturer and despite being very helpful, they could not lead me into anyone that had them in stock.