Overheating problem.
#1
Registered
Thread Starter
Overheating problem.
My brother went out in his boat this weekend and ran his engine so hot it quit. After he started back up it had a knock in it. I'm assuming he warped a head and possibly hydraulicked and bent a rod. Anyone have any other ideas? Thanks.
#2
Registered
Join Date: Mar 2004
Posts: 205
Likes: 0
Received 0 Likes
on
0 Posts
I overheated my old boat because I had a plastic bag wrapped around the drive that I ran over cut off the water supply my temp gauge didn't read anything because there was no water on the sensor. All I saw was the oil psi falling and it stopped After it cooled down it would run but knocked and carried on high I spun bearings. I turned it in to insurance and built the motor they even paid me to pull it and do the work