SC5000 Master reset?
#1
Charter Member
Charter Member
Thread Starter
Join Date: Oct 2000
Location: Lake Orion, MI. USA
Posts: 1,560
Likes: 0
Received 0 Likes
on
0 Posts
SC5000 Master reset?
Does anybody know how to perform a smartcraft sc5000 master reset? The dealer installed a new system view and did not set up the port engine, after the first power up it wont allow you to set it up until you perform a master reset.
I called merc racing and two tech are working on it and no answer yet. for over 3 hours.
I called merc racing and two tech are working on it and no answer yet. for over 3 hours.
__________________
Ray
Ray
Last edited by Raypanic; 06-22-2007 at 12:01 PM.
#2
Charter Member
Charter Member
Thread Starter
Join Date: Oct 2000
Location: Lake Orion, MI. USA
Posts: 1,560
Likes: 0
Received 0 Likes
on
0 Posts
Finally called merc again and takled to Scott, He had the answer right away.
highlight the light bulb icon (settings) Hold the down arrow for 5 sec. then touch the up arrow while keeping the down arrow pushed. Then select OK and then you can reset the system and add the port engine. No where in any manuals that I have does it tell you this.
highlight the light bulb icon (settings) Hold the down arrow for 5 sec. then touch the up arrow while keeping the down arrow pushed. Then select OK and then you can reset the system and add the port engine. No where in any manuals that I have does it tell you this.
__________________
Ray
Ray