Need .040 stocked blower piston... Help.
06-29-2007, 12:14 PM
#1
Registered
Thread Starter
Join Date: Dec 2005
Location: Mission Viejo, CA
Posts: 390
Likes: 0
Received 0 Likes
on
0 Posts
Need .040 stocked blower piston... Help.
I need a blower piston in a 454 block with a 6.385 rod @ .040 over and JE or SRP has to do them custom. Does anybody here know of a manufacturer they like other than JE that makes a .040 oversize of the shelf?
Last edited by ghittner; 06-29-2007 at 12:43 PM.
06-29-2007, 01:14 PM
#2
MarineKinetics
Platinum Member
06-29-2007, 03:40 PM
#4
MarineKinetics
Platinum Member
100% correct, I read pistons, not piston.
If you are replacing only 1 piston you will need a direct replacement not only for weight but material compatability (thermal expansion), ring sizing etc.
Bob
