Water Impeller questions
#1
Registered
Thread Starter
Join Date: Nov 2003
Location: 1 Flu Ovr KuKos Nest-WI
Posts: 9,950
Likes: 0
Received 0 Likes
on
0 Posts
Water Impeller questions
Mine went out today. I picked up another one, installed it and smoked it again. Question: does the paddle wheel slide in easy? I had to bend the flappers 30% to get in the housing. I bent them clockwise and it was very tight but did fit after I bent them. Are the flappers supposed to be straight-up inside housing or do you guys bend them in hard to fit. Key shaft was perfect, slid right on. I gave the parts guy my serial # on '04-05 525, I hope he knew.
Also, If you have a part # I'd appreciate it. The part number I have 47-59362T Impeller. Thanks alot.
Also, If you have a part # I'd appreciate it. The part number I have 47-59362T Impeller. Thanks alot.
#2
Registered
Join Date: Feb 2007
Location: Austin, Texas
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
Good thread on proper impeller replacement procedure:
http://www.teambajamarine.com/forum/...ead.php?t=6560
http://www.teambajamarine.com/forum/...ead.php?t=6560