Setting points BBC
#1
Gold Member
Gold Member
Thread Starter
iTrader: (5)
Join Date: Oct 2005
Location: Olmsted Falls,Ohio Marblehead,Oh
Posts: 11,634
Likes: 0
Received 204 Likes
on
132 Posts
Setting points BBC
I was going to do a electronic ignition upgrade but decided for now to just do new points, 86 Baja with 400's
How do I set them up? I have done them in the past in a 20ft Sea Ray but never made sure they were perfect, I want this boat to run right, how do I set the dwell?? my dad has a old school dwell meter, just not sure what to look for.
Any info would help, thanks, Tim
How do I set them up? I have done them in the past in a 20ft Sea Ray but never made sure they were perfect, I want this boat to run right, how do I set the dwell?? my dad has a old school dwell meter, just not sure what to look for.
Any info would help, thanks, Tim
#3
Registered
Join Date: Nov 2002
Location: SOUTHERN CALIFORNIA
Posts: 708
Likes: 0
Received 0 Likes
on
0 Posts
With the cap off,set the contact point of the points on one of the lobes of the dist.make sure the plastic/fiber is directly on top of the lobe.adjust the point now to the desired gap.usualy the thickness of a match book cover is about the norm.