350 Marnum cam I.D.
10-07-2007, 08:35 AM
#1
Registered
Thread Starter
Join Date: Jun 2006
Location: SW Florida
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
350 Marnum cam I.D.
I picked up a 350 Magnum engine, built up and now have questions about the cam. I am suspicious that the cam is not stock Mercruiser for Marine application.
Without tearing the motor down (becaude it's installed) is there any way to get a rough idea of overlap,lift, cam timing that might be a clue. Would a degree wheel help?
I am like Clinton, I don't want to inhale.
The builder can no longer be contacted and I am suspicious of some of the work done on the engine.
It is set up with a QuadCarb and EMI Thunder headers.
Without tearing the motor down (becaude it's installed) is there any way to get a rough idea of overlap,lift, cam timing that might be a clue. Would a degree wheel help?
I am like Clinton, I don't want to inhale.
The builder can no longer be contacted and I am suspicious of some of the work done on the engine.
It is set up with a QuadCarb and EMI Thunder headers.
