Bravo 1 xd Hyraulic trim Annode mounts???
#1
Registered
Thread Starter
Join Date: Aug 2007
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
Bravo 1 xd Hyraulic trim Annode mounts???
Hello!
I have the 454 mags with Bravo 1 xd Hydralic Trim and there are 4 hole on the end of the cap where the arm comes out to lift the drive.
The problem is, all of the 4 holes are only 1/4 in deep and not theraded. I want to protect my motore, but not sure how far i can drill into this end cap without going through the hydraulic housing...
Any suggestions? I couldn't find any exploded diagrams online.
Thank you and happy new year from a new boater!
I have the 454 mags with Bravo 1 xd Hydralic Trim and there are 4 hole on the end of the cap where the arm comes out to lift the drive.
The problem is, all of the 4 holes are only 1/4 in deep and not theraded. I want to protect my motore, but not sure how far i can drill into this end cap without going through the hydraulic housing...
Any suggestions? I couldn't find any exploded diagrams online.
Thank you and happy new year from a new boater!