Recessed Footwells
#1
Registered
Thread Starter
Recessed Footwells
Can I get a rollcall on who would be interested in a pair of recessed footwells as the pic shows? Don't start with "how much are we talking about". Let's start with a basic, yes or no. Dave (GLASDAVE on this site) has done some work on my boat and is a first class glass guy. (would that make him a "FCGG" ?) He could use one of my footwells as a baseline for making a mold. I will call him and see if he wants to make this a wintertime project. I will post this over on the AO and Chris sides to see if there is any further interest.
#3
Registered
Join Date: Oct 2002
Location: Cincinnati, Ohio
Posts: 1,477
Likes: 0
Received 0 Likes
on
0 Posts
Count me in for a pair.
Charlie, will these work in our boats? We already have a angle made into the floor. I wonder if they will fit between the angle the dash or if they will be too tall. Can you give a height measurment? Based on the pictures I don't think it will fit. My thoughts were to fab what I needed out of some thin gauge alum and tig it together.
Charlie, will these work in our boats? We already have a angle made into the floor. I wonder if they will fit between the angle the dash or if they will be too tall. Can you give a height measurment? Based on the pictures I don't think it will fit. My thoughts were to fab what I needed out of some thin gauge alum and tig it together.
Last edited by tssteph; 10-13-2008 at 08:36 AM.
#6
Registered
Join Date: Nov 2002
Location: Champaign, IL
Posts: 654
Likes: 0
Received 0 Likes
on
0 Posts
that was the only thing the american offshore modified during the early years... but it was a modified chris craft liner... and I think all they did was remove the gauge kick outs and make it flat... unless the now aluminum gauge panel goes too low.
Don
Don
#9
Registered
Thread Starter
These dimensions are the overall, outside flange to outside flange. 14.5" wide 16.5" tall 13.75" deep
The deep dimension does not take into account the laminate thickness. Possible additional of .375" to the 13.75"
The deep dimension does not take into account the laminate thickness. Possible additional of .375" to the 13.75"
Thread
Thread Starter
Forum
Replies
Last Post
NJgr8ful
General Boating Discussion
37
06-12-2005 08:51 PM