Cuttin Baffles
08-21-2009, 09:35 PM
#1
Registered
Thread Starter
Join Date: Aug 2009
Location: North Las Vegas
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
Cuttin Baffles 87 223ls
ok Yes I used Search... I found one that cnotch it with a sawzall.. Does any one have any pictures. Im think of drilling 2 side by side 2inch holes with holesaw bits.. Just want boat a little silent thinder louder.
Last edited by BiLLyLaurianO; 08-22-2009 at 10:58 AM. Reason: title boat type
08-22-2009, 09:43 AM
#3
Registered
Join Date: Aug 2006
Location: IAD/FLL
Posts: 2,090
Likes: 0
Received 0 Likes
on
0 Posts
Original SR1 Silent Thunder or Fastech box?
Not sure about Fastech, but Sawzall is the way to go. Depending on which boat you have, you'll see it's not that easy to reach the baffles with a hole saw. I think I used an extra long blade on the Sawzall. I also had the luxury of removing the tips.
Not sure about Fastech, but Sawzall is the way to go. Depending on which boat you have, you'll see it's not that easy to reach the baffles with a hole saw. I think I used an extra long blade on the Sawzall. I also had the luxury of removing the tips.
08-23-2009, 06:47 AM
#4
Registered
I removed the tips and used a dremel it won`t take long.
08-24-2009, 08:39 AM
#6
Registered
Thread Starter
Join Date: Aug 2009
Location: North Las Vegas
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
