Dash Insert? ANYONE???
#1
Registered
Thread Starter
Join Date: Jul 2006
Location: Oshawa, Ontario, Canada
Posts: 2,034
Likes: 0
Received 1 Like
on
1 Post
Dash Insert? ANYONE???
I am changing the gauges in my 95 Outlaw over the winter, mainly because the factory speedo is an "odd" size 3 3/4] and I would like to switch to the newer Livorsi or Auto Meter ones that are usually 3 3/8.
So, here's the thing, I have the boat away for the winter, in a shop, under about 1/2 dozen tarps and covers and it would be a GIANT pain in the butt to get to, and to remove the gauges and get the insert out.
Does ANYONE have a templete? or know where I can get a dash insert for the boat? I have checked Ebay/Craiglist for a dash insert, but, so far, no luck
ANY input would be appreciated!
Thanks!
Michael
So, here's the thing, I have the boat away for the winter, in a shop, under about 1/2 dozen tarps and covers and it would be a GIANT pain in the butt to get to, and to remove the gauges and get the insert out.
Does ANYONE have a templete? or know where I can get a dash insert for the boat? I have checked Ebay/Craiglist for a dash insert, but, so far, no luck
ANY input would be appreciated!
Thanks!
Michael
#3
Registered
#4
Registered
Thread Starter
Join Date: Jul 2006
Location: Oshawa, Ontario, Canada
Posts: 2,034
Likes: 0
Received 1 Like
on
1 Post
I had NO idea Livorsi made and adapter, will check that out, THANKS GUYS!, I had planned on using the carbon fiber faced gauges with red rims, would I have to use the black or white rims on all the other gauges to make it "look" right?, either way I will check it out, Thanks again!
Michael
Michael