REV Control for TB-1V Ign.
#1
Registered
Thread Starter
iTrader: (7)
REV Control for TB-1V Ign.
What is the reasonable way to go in regards to a Rev Control for a stock Merc. Ign. set up. TB-1V Ign. Years ago I used a couple but have no idea what model they where. I was thinking they were MSD that just simple hard wired into my TB ign.
It seems like there is so many MSD items now a days. I saw this one here although it's not for Marine use. I could alwlays mount it up under the dash panel.
http://cgi.ebay.com/ebaymotors/MSD-I...item20ae0b3351
Any help would be great.
Thanks,
John
It seems like there is so many MSD items now a days. I saw this one here although it's not for Marine use. I could alwlays mount it up under the dash panel.
http://cgi.ebay.com/ebaymotors/MSD-I...item20ae0b3351
Any help would be great.
Thanks,
John
#3
Platinum Member
Platinum Member
MSD has a box you can wire into the Merc TB IV. The cost is about $100-110 each. I will sell you two for $100 and guarantee they work. I probably have another $100 in the RPM plug-in chips I will throw in.
Most important, I have the wiring diagram We used these for years before moving to MSD...then Crane.
Most important, I have the wiring diagram We used these for years before moving to MSD...then Crane.
#4
Registered
Thread Starter
iTrader: (7)
MSD has a box you can wire into the Merc TB IV. The cost is about $100-110 each. I will sell you two for $100 and guarantee they work. I probably have another $100 in the RPM plug-in chips I will throw in.
Most important, I have the wiring diagram We used these for years before moving to MSD...then Crane.
Most important, I have the wiring diagram We used these for years before moving to MSD...then Crane.
Just let me know how you'd like to handle payment.
Thanks,
John