502 with blower, how many hrs before adj valves?
#1
Registered
Thread Starter
Join Date: May 2008
Location: Burlington, VT
Posts: 100
Likes: 0
Received 0 Likes
on
0 Posts
502 with blower, how many hrs before adj valves?
If I had a big block with a blower on it. The valves must need adjustment more often than a stocker.... Odviously it could be depend on maybe how it was built or how hard you run it.. but as a general rule how many hours do you run before you adjust them???
Thanks,
Ryan
Thanks,
Ryan
#4
Charter Member # 55
Charter Member
Hydraulic lifters should be never. Solids, depends on how hard you run. A friend of mine runs solids and has checked the adjustment, but has never actually had to adjust them. I think he has about 100hrs on his engines.