rinda merc tool
#1
Registered
Thread Starter
rinda merc tool
can anyone give a little insight on the tool. is it worth it. also does the 496 HO need the number 5 software . if so is that a different tool or can all the tools be upgraded if it did not support the updates.
#2
Registered
Join Date: Mar 2009
Posts: 496
Likes: 0
Received 0 Likes
on
0 Posts
Yes they are worth it if you are going to be working on your own engine or a friends boat, And yes rinda does sale updated chips to install in the scan tool as the engines get more complexed over time. Not sure now but the last chip I bought was $125.00ish I believe, And you can order right from rinda by phone.