Sea Pump Nose Housing Rebuild
03-10-2010, 06:59 PM
#1
Registered
Thread Starter
Join Date: Sep 2005
Location: O'Fallon, MO
Posts: 153
Likes: 0
Received 0 Likes
on
0 Posts
Sea Pump Nose Housing Rebuild
Does anyone have the shop manual page or instruction or tips on how to rebuild the sea pump nose housing? I notice grease was leaking out behind the pulley so I pulled it off to rebuild. I plan on replacing both bearings, seals, and retaining ring.
Thanks in advance,
Mike
Thanks in advance,
Mike
03-10-2010, 07:37 PM
#3
Registered
Join Date: Dec 2007
Location: Detroit River/ lake Erie
Posts: 782
Likes: 0
Received 0 Likes
on
0 Posts
03-10-2010, 08:51 PM
#5
Registered
Join Date: Mar 2006
Location: Milwaukee, WI
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
I was told by the Merc dealers they are not serviceable.
But that didnt stop me. I found all for the parts at Bearings inc.
I have a fresh one on the shelf.
any questions you could call me at 414-581-4300
Jeff
But that didnt stop me. I found all for the parts at Bearings inc.
I have a fresh one on the shelf.
any questions you could call me at 414-581-4300
Jeff
03-10-2010, 08:57 PM
#6
Registered
Join Date: Dec 2007
Location: Detroit River/ lake Erie
Posts: 782
Likes: 0
Received 0 Likes
on
0 Posts
03-10-2010, 08:59 PM
#7
Registered
Join Date: Dec 2007
Location: Detroit River/ lake Erie
Posts: 782
Likes: 0
Received 0 Likes
on
0 Posts
VIP Member
