454 Cam Question
#1
Registered
Thread Starter
Join Date: Apr 2010
Location: Madison, Ms
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
454 Cam Question
I have a 25' Baja with a 330hp 454 in that I am in the process of rebuilding and was wondering what would be the best cam to go with. I am looking for the most performance I can get with out going extreme. I am really just freshening up the motor and plan on leaving it pretty much stock. Any help would be very much appreciated.
#2
Registered
Join Date: Jul 2008
Location: Darwin, Australia
Posts: 730
Likes: 0
Received 0 Likes
on
0 Posts
Call RMBuilder (Bob M) his number is on here if you do a search or PM him.
He'll sort you out with what you need mucha easier than trial and error with other types of cam.
He'll sort you out with what you need mucha easier than trial and error with other types of cam.
#3
i agree Call RMBuilder (Bob M) he will put you rigth were you want to be!!!!! and take that steel intake off and go with a air gap intake with a holley carb . i did on my 330 made more power and got better gas miles . plus you will gain little top end . i did this on my formula and was very happy good luck