circ pump to crossover hoses ?
04-20-2010, 08:14 AM
#1
Registered
Thread Starter
Join Date: Jul 2002
Location: pa
Posts: 2,233
Likes: 0
Received 0 Likes
on
0 Posts
circ pump to crossover hoses ?
on my 500hp w/ gills i have 4 hoses coming of the stock t/stst housing to my gills 2 go down to the bottom rails on the manifolds and the othe 2 go to the back side upper part of the manifolds they are the 2 that come off the brass peice with the spring loaded check balls in it. my crossover only has 2 outlets so how do i plumb this system.
04-20-2010, 09:53 AM
#3
Registered
iTrader: (2)
Join Date: Aug 2005
Location: Between A Womans Leggs in IL
Posts: 6,306
Likes: 0
Received 1 Like
on
1 Post
get rid of the check valve and install a 90 or staright fitting,hook the existing hose that goes to the riser and run the water feed hose into the bottom of the manifold like shown in the pic..
http://www.cpperformance.com/detail.aspx?ID=2943
http://www.cpperformance.com/detail.aspx?ID=2943
04-20-2010, 08:09 PM
#4
Charter Member
Charter Member
Join Date: Nov 2000
Location: Lake Charles, LA USA
Posts: 1,094
Likes: 0
Received 0 Likes
on
0 Posts
Call Gil and get hoses and hose barbs that takes out the tee on the manifolds. The hoses route the manifold water to the riser.
__________________
Long time cult member.
Long time cult member.
