oil cooler
#1
Registered
Thread Starter
Join Date: Oct 2009
Location: Dayton, Ohio
Posts: 136
Likes: 0
Received 0 Likes
on
0 Posts
oil cooler
Had my 311 out today and have an oil leak... on the cooler that is mounted behind the intake on the inlet side there is a valve??? it has 4 ports on it, one of which goes straight in the cooler and the other 3 are connected to oil lines. Upon removal of it it looks like some kind of pressure releif valve?? Where can i find a new one???? there is no part # on it... and to be honest i have no clue of what the hell it even is.. so the question is what is it and where can i get one??
Last edited by theadamv1; 05-31-2010 at 04:11 AM.
#3
Registered
iTrader: (1)
thermostat ....
http://www.jegs.com/i/Derale/259/25719/10002/-1
May not be the same brand ....prob with most automotive type is set @ 180* ... you really need 200 or actually 212* to remove moisture .....m
http://www.jegs.com/i/Derale/259/25719/10002/-1
May not be the same brand ....prob with most automotive type is set @ 180* ... you really need 200 or actually 212* to remove moisture .....m
#4
Registered
Thread Starter
Join Date: Oct 2009
Location: Dayton, Ohio
Posts: 136
Likes: 0
Received 0 Likes
on
0 Posts
thermostat ....
http://www.jegs.com/i/Derale/259/25719/10002/-1
May not be the same brand ....prob with most automotive type is set @ 180* ... you really need 200 or actually 212* to remove moisture .....m
http://www.jegs.com/i/Derale/259/25719/10002/-1
May not be the same brand ....prob with most automotive type is set @ 180* ... you really need 200 or actually 212* to remove moisture .....m
looks like the one i have is made by permacool, sumit racing has then in stock if it is the 1/2 in threads... which is cool cause i wann use this thing this weekend since i only took it out for trial run this weekend and put it back on the trailer