Speed o pick up tube
06-09-2010, 01:33 PM
#2
Registered
Join Date: Aug 2007
Location: Destin, Fl
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
Ken,
Get rid of it and update to a GPS speedo, more accurate, no drag and you don't have to worry about bending pick up tubes when putting on the trailer or lift. I've got a small bundle of bent ones from LMARTH the previous owner and I've bent 2 so far. I am currently swapping over to a GPS speedo, it plugs into my GPS so you don't have to run a separate GPS receiver on the deck.
Can you show us some pics of that 50?
Thanks,
DICDIK
Get rid of it and update to a GPS speedo, more accurate, no drag and you don't have to worry about bending pick up tubes when putting on the trailer or lift. I've got a small bundle of bent ones from LMARTH the previous owner and I've bent 2 so far. I am currently swapping over to a GPS speedo, it plugs into my GPS so you don't have to run a separate GPS receiver on the deck.
Can you show us some pics of that 50?
Thanks,
DICDIK
06-10-2010, 10:47 AM
#5
VIP Member
is this what ya need? 388
Mine around 95mph needle starts bouncing around,coming out of the water.
hey take some picks of the conversion when ya put the drives on.
Rob
Mine around 95mph needle starts bouncing around,coming out of the water.
hey take some picks of the conversion when ya put the drives on.
Rob
__________________
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
06-10-2010, 11:54 AM
#6
Registered
Join Date: Aug 2007
Location: Destin, Fl
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
Ken,
Nice looking boat or is it classified as ship at that level, haha. I updated to the GPS speedo and the rest of the gauges while upgrading my dash it should be done in a couple of weeks and will post before and after pics. Good luck with the drive conversion.
Rich
Nice looking boat or is it classified as ship at that level, haha. I updated to the GPS speedo and the rest of the gauges while upgrading my dash it should be done in a couple of weeks and will post before and after pics. Good luck with the drive conversion.
Rich
Gold Member
