AIR TIME

I am getting my blower motor finally week of the 20th from Dean.but the bilge is tight cause gas tank runs across it. so to make this set up shorter should Igo to a single belt serpentine set up for sea pump or 2 pulley v belt with sea pump double pulley with ps. need to keep big blower belt with 1071. if I need to move gas tank that means new tank with new shape and two extra weeks, man I wish this motor was done on time last summer. I just want to use the new boat I bought last oct. oh I missed a measurement last fall thought I had two more inches its going to be close with a 3 belt set up.

Audiofn

I don't think it is going to matter what way you go because the belt has to line up on the blower...?

Airpacker

serpentine setup is narrower than a 2 v set up.

AIR TIME

I should of ate the bulit, cut out the gas tank and have had the glass guy redo the bulkhead when it was up with you. so if it won't fit I will cut out the tank have new made and in while tails are being made in a few weeks, also just might see where the headers line up in the baja to get L and W and just order them. then when motor is in make a jig out of pvc pipe mark and cut holes. this motor better be ready next week or houston we have a problem.