Bennett Tabs?
06-15-2010, 06:51 AM
#1
Charter Member #232
Charter MemberThread Starter
Bennett Tabs?
I have them on my 18 Donzi. They are not working. Does anyone have a diagram and or instructions for these things?
Jon
Jon
__________________
Put your best foot forward!
Put your best foot forward!
06-15-2010, 07:03 AM
#2
Registered
Join Date: Feb 2005
Location: Southern Minnesota
Posts: 288
Likes: 0
Received 0 Likes
on
0 Posts
Mine are not working either...I was just coming on here to see if I could find some info on here......
Mine seam to be very slow .....The Gauges will either show all the way up or all the way down but when you go back and look they are not where the gauges says they are
Mine seam to be very slow .....The Gauges will either show all the way up or all the way down but when you go back and look they are not where the gauges says they are
06-15-2010, 07:31 AM
#3
Call Bennett, their customer servince and Technical is the best in ANY business. If you need parts, they will usually even send them no charge
They are local to me, and when I broke a new piston hinge(my fault, by screwing the fitting in too far) I drove to the shop, and the owner handed me a new one no charge. I have heard several other good stories or thier service.
They are local to me, and when I broke a new piston hinge(my fault, by screwing the fitting in too far) I drove to the shop, and the owner handed me a new one no charge. I have heard several other good stories or thier service.
