X-Dimension Help
#1
Registered
Thread Starter
Join Date: Jun 2010
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
X-Dimension Help
I am trying to figure out the correct x-d for a twin outboard with a bracket. The offshore hull 30 ft longand 8ft wide, and 24 degree dead rise. Any help would be great.
#2
Registered
iTrader: (2)
Join Date: Aug 2005
Location: Between A Womans Leggs in IL
Posts: 6,306
Likes: 0
Received 1 Like
on
1 Post
Fixx
with out seeing it its going to be hard to tell you what the rite number is..take into consideration first is whare your water pick up is,,how long your lower cases are and it can go on from their..
#3
Registered
Thread Starter
Join Date: Jun 2010
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
The motors are 275HP Johnsons with lwp and nose cones. My next question is how high should the plates be in relation to the bottom of the boat I heard that they should be 2" higher??????????