382 Drive Alignment?
#1
VIP Member
VIP Member
Thread Starter
382 Drive Alignment?
I know this has been posted many times,but I'm looking for specifics. Where should my XR's be set on a 2004 382. Toed in, out, or straight? Right now they are 1/2 inch in,and it just seems a little much. Any help would be appreciated.
#2
Registered
Join Date: Mar 2006
Location: Milwaukee, WI
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
drives in or out i have always set mine at o, not in or out you will hear toe in or out from others and I will not disagree but, less resistace means more speed and I have not seen any nevgative handling results on my Formula's v-hulls and step hulls with setting the drives at 0 % in or out.
Thanks,
Jeff
Thanks,
Jeff
#4
Registered
Join Date: Jun 2008
Location: McHenry, IL
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
I once read somewhere (Teague tips i think) 1/8 inch in if you turn your props in and 1/8 inch out if you turn your props out. The theory behind this is that the spinning torque of the propellers will then actually make the drives at zero at speed.