formula206ls

Hi All,

On my 1988 242LS I found that there is a plastic sleeve that fits over the top of the two front seat pedestals like a cap and then the bucket seat fits over it. This is all under the actual seat and at the top of the pedestal. I think the purpose is to prevent unnecessary wear on the pedestal base. Any way mine are cracked. Where can I get replacements?

Thanks in advance.

Peter

jjj

The 206ls I had in the past had the same thing. I got them at the Formula dealer when mine needed replacing. If you can not locate them, I may have one stuffed on a shelf some where, but I will not be at that location untill the weekend and will only have very limited cpu access while there for my 2 wk vac. Let me know if you can not get from Formula.

formula206ls

Thanks. I live in MA myself. I would need two of them but will take one if that's all you have??! Let me know.

Ted G

iTrader: (1)

http://www.toddusa.com/productdetails.aspx?id=115&f=54

jjj

I'll check for it this weekend when on the Cape.

formula206ls

Hey Ted G,

Thanks!!!! Are these definately the right size for the factory installed 242LS pedestals from 88?

Peter

formula206ls

In other words are the pedestals definately 2 7/8"? I am not near the boat to measure.