Biggest cam/ Stainless Marine Std risers
#1
Registered
Thread Starter
iTrader: (4)
Biggest cam/ Stainless Marine Std risers
What is the biggest cam some of you are running with the std length stainless marine Gen II riser? I've got a 234/242 duration w/114 lobe seperation.
The shop that was supposed to have the stainless to extend my exhaust didn't have it. Now I'm SOL..... Can I run this temporarily untill I can get the exhaust modified or is it a really stupid move?
The shop that was supposed to have the stainless to extend my exhaust didn't have it. Now I'm SOL..... Can I run this temporarily untill I can get the exhaust modified or is it a really stupid move?
#7
Registered
Join Date: Oct 2000
Location: Knoxville,TN, USA
Posts: 374
Likes: 0
Received 0 Likes
on
0 Posts
Stainless Marine
I would run the Stainless Marine long, through transom risers that dump water right at the end of the riser. No worries there. Reversion is a killer.
#8
Registered
Thread Starter
iTrader: (4)
I finally found a place that had the stainless that I need... I'm going to run the inner pipe so that it dumps the exhaust into the silent-thunder box which will extend the inner pipe at least 15 inches. With that I will be safe.