2003 vs 2004 400ss differences
#1
Registered
Thread Starter
Join Date: Jun 2006
Location: GLOC - Tulsa
Posts: 151
Likes: 0
Received 0 Likes
on
0 Posts
2003 vs 2004 400ss differences
Can anyone confirm any differences between the 2 years.
also, any reason to go for the 500s vs the 496s?
More and more of these are popping up all over the place.... getting closer to pulling the trigger on one!
Thanks!
also, any reason to go for the 500s vs the 496s?
More and more of these are popping up all over the place.... getting closer to pulling the trigger on one!
Thanks!
#3
Registered
Join Date: Oct 2005
Location: Lake of the Ozarks MO
Posts: 356
Likes: 0
Received 0 Likes
on
0 Posts
The reason we did not sell as many 500hp boats was two fold.
1. The 500hp exhaust system HAS to open at around 3200 R.P.M. so the motor can breathe. This was the speed that people wanted to cruise at and they did not like the noise.
2. The speed increase for 500hp over the 496/425hp motors did not justify the cost.
3. The 500hp used a 502 cu.in block and the 496 used the 8.1L Vortec block. Close water cooled, more reliable. The only one we had go bad had a catastrophe failure and loss a rod.
We will have to wait and see what the NEW 8.2L 502 w/catalytic converter will be like. Stay tune for update................Capt. Steve
1. The 500hp exhaust system HAS to open at around 3200 R.P.M. so the motor can breathe. This was the speed that people wanted to cruise at and they did not like the noise.
2. The speed increase for 500hp over the 496/425hp motors did not justify the cost.
3. The 500hp used a 502 cu.in block and the 496 used the 8.1L Vortec block. Close water cooled, more reliable. The only one we had go bad had a catastrophe failure and loss a rod.
We will have to wait and see what the NEW 8.2L 502 w/catalytic converter will be like. Stay tune for update................Capt. Steve
Last edited by selpel; 08-06-2010 at 09:32 PM. Reason: spelling