Breather question on 454map mpi
#1
Registered
Thread Starter
iTrader: (1)
Join Date: Aug 2009
Posts: 460
Likes: 0
Received 0 Likes
on
0 Posts
Breather question on 454map mpi
I have an aftermarket Vortech breather on my 454mag Mpi.. I run a #6 hose from my valve cover right to the face of the breather so it does not go through the filter.. That seems like it would be allot of neg. preasure sucking from the crank case.
Will this be ok especialy at WOT.. Or am I asking for drawing up too much engine oil or mist and messing up sensors etc.
Will this be ok especialy at WOT.. Or am I asking for drawing up too much engine oil or mist and messing up sensors etc.