Throttle/Shifter Quadrants for twins?
#1
Registered
Thread Starter
Join Date: Sep 2010
Location: Amite, Louisiana
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Throttle/Shifter Quadrants for twins?
I am about to begin a de-rigging/re-rigging adventure and getting my data in a row.
I am looking for a dual throttle, shifter quadrant that will also allow the use of a HotFoot throttle to power the engines.
This will be going on a 25' Motion with twin 300XS power.
Any suggestions will be appreciated.
Thanks!!
I am looking for a dual throttle, shifter quadrant that will also allow the use of a HotFoot throttle to power the engines.
This will be going on a 25' Motion with twin 300XS power.
Any suggestions will be appreciated.
Thanks!!
#3
Registered
Join Date: Jan 2007
Location: Richland, WA
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
hey i would love to see some picures and numbers. I also have 25' motion with twin 300xs. I bolted them to the transom, I can only get 1 3/8" above, the motors have offshore mids, 15x34 3-blade mercury cleavers. I have the props turning in. I have way too much water pressure, I think I will try putting the setbacks in. I get 108 turning between 6000-6050. I was thinking I would be able to get more. The motors now have 15 hours on them.
http://www.youtube.com/watch?v=DkGYxpvWgwk
http://www.youtube.com/watch?v=DkGYxpvWgwk