Howards Cams Lifters?
#1
Geronimo36
Gold Member
Thread Starter
Howards Cams Lifters?
Anyone use Howards Cam's lifters, specifically the Pro Lite direct lube mechanical roller lifters (91133).
According to Howards the lifters are all manufactured by Morel . They cost roughly $400 for a set. They also make another model which is the same as the 91133 but it's rebuildable, that cost is roughly $675.
I asked the Howards rep what the difference is between their lifter and the Isky Red Zone. Their response is that the Isky is more expensive.
According to Howards the lifters are all manufactured by Morel . They cost roughly $400 for a set. They also make another model which is the same as the 91133 but it's rebuildable, that cost is roughly $675.
I asked the Howards rep what the difference is between their lifter and the Isky Red Zone. Their response is that the Isky is more expensive.
#3
Geronimo36
Gold Member
Thread Starter
#7
Registered
I have never rebuilt a set. I guess it all depends on if you can rebuild them yourself. If you have to pay someone or send them in to have them rebuilt, then I would say no, just get new ones that you know are new.
Eddie
#8
Geronimo36
Gold Member
Thread Starter
Thanks Eddie and others such as JC Performance and Rogers Speedshop who do all my machine work.. I feel I made the right decision in my purchase.