250 B&M Blower OIL Change?
#1
Registered
Thread Starter
Join Date: Oct 2009
Location: Splendora, TX
Posts: 658
Likes: 0
Received 0 Likes
on
0 Posts
250 B&M Blower OIL Change?
How do you drain the oil in a 250 B&M Blower?
It looks like I have to take the entire blower off and turn it upside down.
That's a stupid design if that is what has to be done.
Also, what type of oil do you put in it?
It looks like I have to take the entire blower off and turn it upside down.
That's a stupid design if that is what has to be done.
Also, what type of oil do you put in it?
Last edited by UrbanDisturbance; 10-29-2010 at 12:59 PM.
#2
Registered
The design is flawed for sure. What works for me is a hand pump like the one used for gear lube. Flatten the tube a little and extract the old oil through the fill hole.
#3
Registered
Thread Starter
Join Date: Oct 2009
Location: Splendora, TX
Posts: 658
Likes: 0
Received 0 Likes
on
0 Posts
I only have around 45 hours on the blowers.
I think it is time to change the oil, but not sure.
What type of oil?
#4
Registered
Join Date: Nov 2001
Location: Pennsylvania
Posts: 3,385
Likes: 0
Received 0 Likes
on
0 Posts
#5
Registered
iTrader: (2)
Join Date: Jan 2003
Location: Lawrenceburg, Indiana
Posts: 167
Likes: 0
Received 0 Likes
on
0 Posts
If they are like my 420's you want to take off the nose to drain oil and grease the coupler(usually wear out from lack of grease). I use merc spline grease on couplers and merc drive oil in blowers.
Last edited by greencard; 10-29-2010 at 04:49 PM.